Lincoln Weldpak 100 Welder

Lincoln Weldpak 100 Welder

The Lincoln Weldpak 100 Welder is a portable, user-friendly, and lightweight wire feed welder that plugs into a 115V, 20 amp outlet. It comes with four voltage settings and continuous wire feed speed adjustment that allow you to weld mild steel from 24 gauge to 1/8″ thick. And, it’s easy to get started since practically everything you’ll need to MIG weld is in the box gun and cable assembly, work cable and clamp, gas nozzle, gas regulator and hose, spool of solid wire, contact tips and handheld with filter plate and lens. Just add a cylinder of shielding gas. But that’s not all there’s also a spool of self-shielded, flux-cored wire, contact tips, and chipping hammer/brush so you can use your Handy MIG to weld with gasless, flux-cored wire too. One year warranty on parts and labor. (90 days warranty on gun and cable).

110 Volt
Weight 46 lbs.
Height 12.6″
Width 8.8″
Depth 18″
Maximum weldable thickness – 1/8″ mild steel
Wire thickness .0025 mm to .0035 mm
Welding gun cable length – 8′
Ground clamp cable length – 8′

Welding helmet included

Description

Four voltage settings and continuous wire feed speed adjustment
allow you to weld mild steel from 24 gauge to 1/8″ thick

Just add a spool of selfshielded, flux-cored wire to use this
Handy MIG® to weld with gasless, flux-cored wire.


Important!
This site makes use of cookies which may contain tracking information about visitors. By continuing to browse this site you agree to our use of cookies.